Provides Exceptional Gear Protection without EP Additive
Almasol® Pure Mineral Gear Lubricant (401) is a balanced formulation of base oil, rust and oxidation inhibitors, wear-reducing agents, and other additives that provides the highest level of protection possible without the inclusion of an extreme pressure additive. When transmission and gearbox manufacturers specify a “pure” or “straight” mineral oil gear oil, it should not contain a chemically active EP agent; other additives, however, are still acceptable for inclusion. In addition to other highly desirable additives, the Almasol 401 formulation contains Almasol, LE’s exclusive wear-reducing additive that protects against premature wear and shields metal against corrosive attack.
Tacky Grease Resists Water, Protects Moving Parts
Wirelife® Almasol® Coating Grease is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its tacky, water-resistant characteristics enable it to adhere strongly to rapidly moving parts and to seal out damaging moisture. Available in three NLGI grades, Wirelife Almasol Coating Grease contains Almasol, LE's exclusive wear-reducing additive that protects against premature wear and shields metal against corrosive attack.
Wirelife® is a registered trademark of and Almasol® is a registered trademark of Lubrication Engineers, Inc.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Superior performing worm gear lubricant based on 100% Paraffinic base oil and ALMASOL®, wear reducing additive
LE's ALMASOL® Worm Gear Lubricants are formulated with 100% mid-continent Paraffinic base oils blended with stable lubricity additives and ALMASOL® to provide protection in a wide temperature range. They protect bronze bull gears from excessive wear in enclosed worm gearboxes. Superior oxidation resistance in high temperature applications where extreme pressure (EP) gear lubricants cannot be used. Provide reduced friction in the high sliding worm gear applications due to formulation with stable compounding and lubricity additives.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Premium Synthetic Lubricant Improves Performance of Eaton Roadranger & Other Manual Transmissions
Synolec® Transmission Fluid (640) is a premium full synthetic lubricant designed for fuel efficiency and extended drain intervals while meeting OEM warranty requirements. It is intended for use in manual transmissions that require a non-EP transmission fluid for light- to severe-duty, on- and off-highway equipment operating in a diverse range of environments. Formulated to protect higher torque transmissions coupled with increased horsepower engines, it will prolong transmission life by reducing gear wear and copper corrosion.
Synolec Transmission Fluid meets or exceeds the specifications of several manual transmission OEMs, including Eaton transmissions such as Roadranger, Ultrashift Plus, Fuller Advantage, FR and RT Series.
Extreme Pressure Gear Lubricant Meets Demanding Requirements of Most Differentials and Transmissions
Monolec® Gear Lubricant (703-704) offers the versatility of one product that meets the demanding fleet requirements of all types of differentials (including limited slip) and transmissions, as well as most industrial enclosed gearboxes. A multiviscosity extreme pressure gear oil, Monolec Gear Lubricant was formulated to achieve the proper balance between load-carrying capacity, film strength and lubricity.
HDSD is highly effective in removing heavy greases, oil, adhesives, lubricants, tar, waxes, asphalt, resins, and other heavy materials.
Silicone-based spray for use as a lubricant with incidental food contact. May be used on machine parts and equipment in locations in which there is potential exposure of the lubricated part to food. For food plant and other industrial use.
A High Performance, Synthetic-Based, GM Approved Automatic Transmission Fluid
Dexron® VI Automatic Transmission Fluid 1136 is a synthetic-based fluid for use as automatic transmission fluid, ATF, in automobiles with automatic and power shift transmissions, in power steering systems, and hydraulic pumps. The DEXRON designation was developed by General Motors, which licenses the brand to ATF vendors. GM's DEXRON VI classification was introduced for 2005 model year and newer GM vehicles. This fluid is also backward compatible and recommended for use in transmissions recommending the use of previous DEXRON fluids. It is formulated to provide smooth shifting, low shudder, and long-life performance in automatic transmissions.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Versatile Fluid Ensures Smooth-Running Automatic Transmissions in Cars & Trucks
Monolec® Syn Multi-Vehicle Automatic Transmission Fluid (1150) is a versatile, high performance product suitable for regular- to severe-duty use in a variety of automatic transmissions in passenger cars and trucks. Replacing LE’s Trans-All EHP Automatic Transmission Fluid (1150), this new fully synthetic formulation has an uptreated additive package that includes Monolec, LE's proprietary wear-reducing additive. This improved formulation is fully compatible with the previous 1150 formulation. No conversion is necessary.
Monolec Syn Multi-Vehicle ATF ensures smooth shifting, reduced wear on parts, longer fluid life and a significant decrease in maintenance costs.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Versatile Grease Offers Long-Lasting Protection
With its versatility and long-lasting performance, Almatek® General Purpose Lubricant (1232) increases uptime, reduces maintenance costs and lowers lubrication costs. Almatek 1232 resists washing or pounding out of bearings, chassis points and other applications – even under shock-loading conditions. It is a distinctive red color, which shows when fresh lubricant forces out old material. Almatek 1232 is recommended for use in construction, marine, mining, industrial and various other heavy-duty equipment applications.
Long-Lasting, Nonmelting Grease Provides Constant Protection for High-Temperature Bearing Applications
Bearings operating in or near heat-generating equipment are subject to temperatures that cause ordinary greases to melt and run, leaving critical bearing surfaces unprotected. Almasol® High Temperature Lubricant is designed to withstand high temperatures, staying in place to provide constant lubrication. It also resists oxidation and vaporization. By ensuring longer lubrication intervals and fewer bearing failures, Almasol High Temperature Lubricant helps contribute to increased production and a healthier bottom line.
Versatile Wear-Reducing Grease Protects Equipment from Moisture & Heat
A general purpose extreme pressure grease for heavy industrial use, Almaplex Industrial Lubricant is extremely versatile, minimizing inventory requirements and misapplication because it works in many different applications. It is especially effective in severe operations caused by moisture or high temperatures. Its robust aluminum complex formulation seals out water and other contaminants that can wreak havoc on the long-term life of equipment.
Almaplex Industrial Lubricant protects against oxidation, rust and corrosion, and its exceptional wear reduction has led LE customers worldwide to redefine “normal” or “expected” equipment life. With longer bearing life, fewer repairs, less downtime and lower lubricant consumption, switching to Almaplex has helped many companies lower their maintenance costs.
Polyurea Grease Prolongs Life of Electric Motor Bearings
Formulated with polyurea thickener and designed specifically for use in electric motor bearings, Monolec® Extend EM Grease offers superior mechanical stability for long service life. It features low bleed characteristics, excellent pumpability and great oxidation resistance. It is especially effective when severe industrial operating conditions such as extreme temperatures and high speeds are present.
Monolec® is a registered trademark of Lubrication Engineers, Inc. Perma® is a registered trademark of perma-tec GmbH u. Co. KG.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Heavy-Duty Grease Performs in Extreme Conditions
Almaplex Ultra-Syn Lubricant has the power to increase equipment uptime and enhance bottom line profitability by offering exceptional quality, versatility and reliability. A heavy-duty synthetic grease containing LE’s proprietary additives Almasol® and Quinplex®, Almaplex Ultra-Syn provides optimum performance under extreme operating conditions. It is an aluminum complex thickened grease made with an ISO 460 viscosity synthetic base fluid, a combination that provides superior high-temperature functionality, low-temperature pumpability and excellent performance in the presence of water.
Almaplex 1299 & 1298 (NLGI grades 2 & 1, respectively) provide 73 percent higher extreme pressure performance than competitive grease, as indicated by the results of the Four Ball EP Test. In the Water Spray-Off Test, competitive greases lost almost six times more grease. This performance offers the potential for energy savings and reduced operating temps in applications such as construction, agriculture, mining, steel mills and paper mills; hammer mills; extruders and ball mills. Almaplex 1299 can be used in couplings where AGMA CG-1, CG-2 and CG-3 lubricants are recommended.
Almaplex 1297 & 1295 (NLGI grades 0 & 000, respectively) are semifluid greases with superior film strength. They are excellent for use in heavily loaded bearings in cold temperature applications. They also perform well in any gearbox that requires a semifluid grease, particularly enclosed gearboxes where housings and seals have lost their ability to retain conventional gear oils.
Solid Lubricant Grease with Calcium Sulfonate Complex Thickener Provides Lasting Protection for Heavy Mobile Equipment
Lubrication Engineers, Inc. formulated its solid lubricant-containing, calcium sulfonate-thickened Almamoly™ HD Grease for use in severe conditions such as high temperatures, heavy loads and water. This high-performance grease is intended for long-lasting use in heavy-duty mobile equipment such as that used in construction, agriculture, open pit mining and road-building.
Almamoly HD Grease contains Almasol®, LE’s proprietary solid additive as well as 5 percent molybdenum disulfide (also known as molydisulfide or moly). Compared to other solid lubricant-containing greases that rely on moly or graphite alone, Almamoly HD Grease’s synergistic combination of moly and Almasol gives it better wear resistance. This unique combination of solids helps ensure reliable lubrication, staying in place even when the lubricant is squeezed out of the contact zone due to extreme pressure (EP) or heavy shock loading. The calcium sulfonate complex thickener provides additional performance features that make this grease desirable for a variety of extreme conditions.
Versatile Grease with Calcium Sulfonate Complex Thickener Protects Equipment from Heat, Moisture & Heavy Loads
Lubrication Engineers, Inc. formulated Monocal® GP Grease for use in environments with challenging conditions such as high temperatures, heavy loads and the presence of water. Its high-performance formula features high-viscosity base fluid, calcium sulfonate complex thickener and Monolec®, LE’s proprietary wear-reducing additive. Available in NLGI 2 and 1 grades, this premium combination imparts a very high dropping point, exceptional inherent extreme pressure (EP) characteristics, superior mechanical stability, low oil bleed, and water resistance – everything you need to protect and extend the life of your equipment.
A versatile general purpose lubricant, Monocal GP Grease is the right solution for industrial and mobile equipment used in a wide variety of industries. It is especially effective when used on bearings operating in a warm, moist environment or in operations where a lot of water is needed to keep equipment cool. Without effective, reliable lubrication, these conditions can lead to costly downtime and repairs.
High-Performance Oil Delivers Superior Lubrication in High-Temperature, High-Load Applications
Duolec Industrial Gear Oil (1601-1610, 1302, 1304) is a high-performance industrial gear oil with ISO grades ranging from ISO VG 46 to 1500. Designed for use in any industrial gear or bearing application that requires a thermally stable, extreme pressure/antiscuff lubricant, it maintains performance even after filtration.
Duolec Industrial Gear Oil contains Duolec, LE’s dual acting additive that provides both wear-reducing and EP protection, and is fortified with a shear stable tackifier to provide adhesion to metal during use.
Versatile, Wear-Reducing Oil Preserves Metal to the Core
Wirelife® Monolec® Penetrating Lubricant (2001) has excellent corrosion resistance and high load carrying (EP) properties. It penetrates to the core of wire ropes, whether they are running or stationary. It is also excellent as a penetrating lubricant for chains of all sizes and works well in a variety of other industrial applications. When used in conjunction with Wirelife Almasol® Coating Lubricant, maximum protection and wear reduction is achieved.
It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a film of heavy-bodied lubricant that protects and lubricates each strand and resists leakage from the wire rope core.
Wirelife® is a registered trademark of and Monolec® and Almasol® are registered trademarks of Lubrication Engineers, Inc.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Self-Healing Fluid Seals & Protects Surfaces
Wirelife® Almasol® Coating Lubricant (2002) is a fluid wire rope lubricant that provides a tough outer coating to seal and protect against fretting corrosion, wear and rust - even under extreme load and moisture. It seals and protects better than any product available. When used in conjunction with Wirelife Monolec® Penetrating Lubricant, maximum protection and wear reduction is achieved.
In addition to its primary function as a coating, it also provides moderate penetration - depending on the tightness of tolerances and the temperature when applied. It contains a petroleum solvent to enhance its ability to penetrate. The solvent evaporates, leaving behind a self-healing, nontacky, protecting film that is highly resistant to wash-off from both fresh and salt water.
Wirelife® is a registered trademark of and Almasol® is a registered trademark of Lubrication Engineers, Inc.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Load-Carrying Oil Is Tough on Rust, Gentle on Environment
Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE's Wirelife® Low Tox® Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Synthetic Oil Provides Ultimate Surface Protection
Wirelife® Almasol® Syn Coating Lubricant (2022) is an extremely tacky, nonasphaltic synthetic lubricant with exceptionally high film strength. Perfect for extreme environments and conditions, it is the ultimate outer surface protector for wire rope and cable and comes from the same advanced technology that LE developed to protect large open gears in the mining and quarry industries. It derives its high load-carrying capacity from its synergistic blend of an extreme pressure additive and Almasol, LE's exclusive wear-reducing additive.
Wirelife® is a registered trademark of and Almasol® is a registered trademark of Lubrication Engineers, Inc.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Tough General Use Lubricant Works Fast To Dissolve Rust
Monolex® is a fast-acting, surfacewetting formula that works as a light lubricating oil as well as penetrating lubricant. The tough film created by Monolex is far more effective than ordinary oils. Its excellent penetrating ability helps it work its way through layers of rust, gum, resins, varnish and dirt, dissolving or washing them away and quickly loosening “frozen” components – even those that are hard to reach. Monolex also contains a water-displacing agent that drives out moisture, allowing it to retard corrosion, even in saltwater applications.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Potent Formula Provides Fast, Effective Industrial Cleanup
Greentastic® Industrial Cleaner is a concentrated liquid solution intended for industrial cleaning uses, including oil and grease. This environmentally friendly water-based formula contains nine carefully selected and blended active cleaning ingredients – almost twice as many as conventional multipurpose products. These powerful ingredients work quickly together to create the different types of cleaning action needed to be effective for a wide variety of industrial applications. Greentastic outperforms conventional non-caustic cleaners. It is not only phosphate-free, but completely phosphorus-free, making it a better choice for the environment.
The power releasing fuel and oil supplement that provides reduced fuel consumption, more power, smoother engine performance and less maintenance.
LE's 2300 L-X® Heavy Duty Chemical Supplement is a combination of oils and chemicals which has been carefully selected utilizing an advanced formulation. It has a unique ability to permeate metal to help today's internal combustion engines achieve maximum performance.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Road-Tested Supplement Contains Cetane Booster For Increased Power & Year-Round Performance
Field-tested for several months on the ice roads of Alaska, LE’s Full Torque™ Diesel Fuel Improver has proven to be a valuable weapon for long haul diesel engine operators fighting to keep their trucks on the road despite harsh environments. Full Torque is a cetane-boosted, detergent-containing formulation that increases power, improves fuel economy, reduces emissions, and provides smoother performance year-round in diesel engines. It is available in winter (W) and summer (S) versions.
Full Torque’s cetane booster increases a fuel’s cetane number up to three numbers, resulting in faster ignition time, more power, easier starts and less smoke at startup. This hard-working diesel supplement is also loaded with special detergents that keep injector systems clean and working at maximum performance, as well as ingredients that protect against wear, water and corrosion. Full Torque has been formulated to work with today’s biofuels, ultra low sulfur diesel (ULSD) fuels, and renewable diesel fuels.
Almasol® Smokeless Chain Lubricant (2705) is a premium grade high-temperature chain lubricant. This USDA H2 lubricant is a dispersion of Almasol®, LE’s exclusive solid wear-reducing additive, and other submicron lubricating solids in a special high-temperature food grade synthetic carrier. It is suitable for application to hot chains without interrupting production, and will not smoke at temperatures up to approximately 288°C (550°F).
Environmentally friendly, synthetic lubricant promotes smooth,long-lasting operation despite extreme heat & moisture
Thorough, penetrating lubrication of the pin and bushing areas of oven chains is of utmost importance in ensuring smooth, efficient operation and long equipment life. Severe operating conditions, including extreme heat and moisture, can lead to corrosion and premature equipment failure if lubrication is inadequate.
Other costly side effects resulting from inadequate lubrication include:
• Chain links sticking and strands of chains becoming inflexible
• Chains becoming longer because of rough operation and wear
• Chains jumping off sprockets, contributing to early breakage and failure
• Electrical energy consumption increasing as the amount of friction increases
A successful oven chain lubricant has the ability to deliver the solids suspended in the lubricant carrier to the pin and bushing areas. As the carrier dissipates, only the necessary lubricating solids are left, coating the metal to prevent wear and corrosion. A good lubricant also will withstand heat over time – resisting oxidation – allowing it to last longer and continue to protect the equipment.
Almasol® Oven Chain Lubricant is the solution to trouble-free oven chain lubrication. It contains a synergistic blend of lubricating solids, including submicron-sized Almasol particles, in a specially designed synthetic carrier fluid. The environmentally friendly fluid evaporates, leaving behind a protective film of solids to lubricate chain parts without any accumulation of gum, carbon particles or other hard deposits. The protective solid film is water-resistant and reduces frictional drag over a broad temperature range in excess of the operating temperature of most ovens.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Premium grade, high temperature chain lubricant contains ALMASOL®, and other submicron lubricating solids dispersed in a special high temperature synthetic carrier. Suitable for application to hot chains without interrupting production operations. When used as directed, the carrier penetrates to all moving parts, leaving a protective film of lubricating solids as it cleanly volatilizes without residue at high temperatures. Will not gum or char, offering maximum migration into chain pins. Reduces frictional drag without building up hard deposits.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
LE’s Earthwise™ lubricants are specifically formulated to be earth friendly while still meeting the rigorous demands of industrial applications. With these products, you can “go green” – and keep up with the latest environmental regulations – without having to sacrifice performance. Earthwise EAL Syn Hydraulic Oil is a certified Environmentally Acceptable Lubricant (EAL), recommended for use in applications on or near waterways. It meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms. In addition, the base oil used in this full synthetic formulation comes from renewable resources.
A long-lasting, nonfoaming fluid designed to protect the life of hydraulic pumps and motors, it offers excellent protection against cold temperatures and resists oxidation in high temperatures. It also withstands extreme pressure, prevents rust and corrosion, and separates from water.
Soft, Semifluid Coating Lubricant Lets You Go Green without Sacrificing Performance
LE’s Earthwise™ lubricants are specifically formulated to be earth friendly while still meeting the rigorous demands of industrial applications. With these products, you can “go green” – and keep up with the latest environmental regulations – without having to sacrifice performance.
Earthwise EAL Wire Rope Grease (3353) is a certified Environmentally Acceptable Lubricant (EAL), recommended for use in applications on or near waterways. It meets the specifications required by the EPA’s Vessel General Permit (VGP). It is readily biodegradable, exhibits minimal aquatic toxicity and will not accumulate in the cells of fish and other aquatic life forms.
It is a soft, semifluid formulation designed to coat wire rope as well as moving chain and cable parts to ensure long life and smooth, quiet operation. Its semi-tacky, water-resistant characteristics enable it to adhere to the application and seal out damaging moisture and protect against rust formation. Its robust additive package, including LE’s proprietary Almasol® and Quinplex® additives, further helps it protect against wear, corrosion, impact, rust and oxidation.
Long-lasting Red Grease Stays Put & Runs Cool
Customers who rely upon Almagard Vari-Purpose Lubricant appreciate its cool-running, long-lasting, water-resistant performance. It dramatically lengthens grease intervals, eliminates bearing failures, can extend bearing life by up to threefold, and does not harden with age.
Recommended for extended service applications, Almagard is extremely tacky and will not wash off, pound out or melt and run, even in severe conditions. It is ideal for on-and off-road equipment where high impact occurs, as well as many in-plant applications.
Watch video of Almagard Vari-Purpose Lubricant
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
NSF H1 certified lubricant designed for use where superior anti-wear protection, rust and oxidation resistance, and H1 performance is desired.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Semi-Synthetic Grease Protects Against Moisture & Other Harsh Conditions at Food Manufacturing Plants
H1 Quinplex® Food Machinery Lubricant (4025-4022) is a semi-synthetic grease suitable for a broad operating temperature range. In addition to being a food grade grease – NSF H1 registered for incidental food contact – it is also robust enough to withstand moisture, high temperatures, extreme pressures and other harsh conditions found at food manufacturing plants. It features an aluminum complex thickener base, providing extreme water resistance, excellent mechanical stability, reversibility and tackiness. Key additives include Quinplex, LE’s proprietary impact-resistant additive, and a rust and oxidation inhibitor. Switching to H1 Quinplex Food Machinery Lubricant results in longer bearing life, fewer equipment repairs, less downtime and lower lubricant consumption.
Food Grade Lubricant Clings to Equipment, Providing Reliable Water-Resistant Protection from Oxidation, Rust & Wear
H1 Quinplex Synthetic Food Grade Oils (4032 and 4046, ISO 32 and 46, respectively) are NSF H1 registered, Kosher Pareve certified lubricants designed to use in food processing and other sensitive environments where superior antiwear, rust- and oxidation-resistant properties are required. Featuring 100% synthetic base oil, H1 Quinplex 4032 and 4046 have excellent load carrying abilities, can be used in low-temperature applications, and contain Quinplex®, LE’s proprietary impact-resistant additive.
Long-Lasting, Nonmelting Food Grade Grease Provides Constant Protection for High-Temp Bearing Applications
Bearings operating in or near heat-generating equipment are subject to temperatures that cause ordinary greases to melt and run, leaving critical bearing surfaces unprotected. H1 Quinplex® High Temperature Lubricant is designed to withstand high temperatures, staying in place to provide constant lubrication. It also resists oxidation and vaporization, and it repels water. NSF H1 certified, it is a suitable lubricant for use in food processing and other sensitive environments. By ensuring longer lubrication intervals and fewer bearing failures, H1 Quinplex High Temperature Lubricant helps contribute to increased production and a healthier bottom line.
Outstanding food grade, penetrating oil and lubricant. Works quickly to dissolve rust and free-up frozen parts. Rapidly penetrates and leaves a heavy lubricant film for further lubrication and corrosion prevention. Formulated from USP Grade mineral oils and other USDA H1 rated components. Contains LE's proprietary additive, QUINPLEX®.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Outstanding aerosol food grade penetrating oil and lubricant. Works quickly to dissolve rust and free-up frozen parts. Rapidly penetrates and leaves a heavy lubricant film for further lubrication and corrosion prevention. Formulated from USP Grade mineral oils and other USDA H1 rated components. Contains LE's proprietary additive, QUINPLEX®
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Superior Heat Resistance Keeps Oven Chain Operating Freely
Ovenworx™ H1 Syn Chain Lubricant (4061) was formulated specifically to combat the demanding conditions present with oven chain applications. In addition, it is approved for incidental food contact and contains no artificial dyes, making it a good choice for food manufacturing plants.
Oven chain efficiency is dependent upon a lubricant that can keep the chain operating freely and smoothly, fighting the ever present heat and moisture that can cause corrosion and eventually lead to premature failure of oven chain pins and bushings. Only the most robust lubricant formulations can perform in this application; it is not an area to cut corners. If the oven chain fails, output comes to a screeching halt.
In addition to this high level of protection, equipment runs more cleanly and efficiently with Ovenworx 4061, which lubricates without the need of solids. Lubricants with solids have to be stirred to keep the solids distributed within the carrier and prevent them from falling out of the suspension. Solids also can create housekeeping issues by building up over time, creating gum and gunk around the application area, especially when over-applied.
Synthetic formula features calcium sulfonate complex thickener
Formulated for use in food processing applications, H1 Quincal™ Syn FG Grease features a synthetic base fluid, calcium sulfonate complex thickener, and Quinplex, LE's proprietary impact-resistant additive. This premium combination imparts a very high dropping point, exceptional inherent extreme pressure (EP) characteristics, superior mechanical stability, low oil bleed, tackiness and water resistance - everything you need to protect and extend the life of your equipment.
NSF H1 registered for incidental food contact, this grease is the right solution for a wide variety of food processing applications. It is especially effective when used on bearings operating in a warm, moist environment or in operations where a lot of water is needed to keep equipment cool. H1 Quincal is robust enough to handle elevated temperatures and other harsh conditions found at food manufacturing plants, resulting in longer bearing life, fewer equipment repairs, less downtime and lower lubricant consumption.
Protects Gearboxes in Food Production Applications
Recommended for a variety of gearboxes and other critical applications in food and beverage manufacturing facilities,H1 Quinplex® White Gear Lubricant (4090-4250) is NSF H1 registered for incidental food contact and was formulated to withstand severe loading conditions and prevent rust and corrosion. H1 Quinplex White Gear Lubricant contains a carefully selected blend of pure mineral and synthetic base stocks to provide superior protection at a wide range of operating temperatures. It also offers antiwear protection, differentiating it from many other white oils on the market. To ensure good metal adhesion, it contains a shear stable polymeric tackifier system including Quinplex®, LE・s proprietary impact-resistant additive.
H1 Quinplex White Gear Lubricant helps factories avoid unplanned downtime and expensive repairs by providing long-lasting, reliable protection that keeps critical equipment running.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Food and USP Grade White mineral oil containing no additives. Authorized for use under USDA inspection and Grading Programs. Rated H1 by the United States Department of Agriculture (USDA). Halal (certified by IFANCA). Kosher Pareve.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
High-Quality Grease Offers Versatile EP Performance
Monolec® Multiplex Lubricant (4622) is a highly versatile, longlife, lithium-complex-thickened grease designed for extreme pressure performance and extended relubrication intervals in a variety of industrial, marine, farm and fleet applications. It contains Monolec®, LE’s proprietary wear-reducing additive, and provides dependable performance in a broad operating temperature range in critical grease points including chassis and wheel bearings. Its versatility makes it possible to consolidate the number of greases used, especially helpful aboard a marine vessel.
Versatile Water-Resistant Grease Formulated Specifically for Centralized Lubrication Systems
Designed especially for use in centralized lubrication systems, Monolec® Industrial Lubricant ensures consistent pumpability for reliable equipment protection in a variety of industrial applications. This aluminum complex grease provides excellent water resistance and will not form permanent emulsions when moisture is present, further protecting equipment from the effects of rust and corrosion. It contains Monolec®, LE’s proprietary wear-reducing additive that provides additional protection from wear, friction and heat; and it contains an extreme pressure additive for performance when heavy loads are present.
An anti-wear hydraulic oil designed to assure longer life for bearings and rubbing surfaces, Equipower™ Hydraulic Oil (4932-4934) contains select base oils for oxidation resistance and an additive package that offers anti-wear properties, rust protection and thermal stability. It is recommended for hydraulic systems operating in highly contaminated environments or where high lubricant consumption is a concern.
A rust & oxidation (R & O) turbine oil designed with high-quality paraffinic base oil and additives that offer rust protection, oxidation stability, rapid water-separating characteristics and foam suppression. It will outperform conventional R & O turbine oils and is completely noncorrosive to equipment parts.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Heavy-Duty Synthetic Grease Provides Extreme Protection
Pyroshield Syn Open Gear Grease is a heavy-duty synthetic lubricant developed for large unshrouded open gears in the mining, mineral processing and cement industries, and for other severe service applications that require a lubricant with superior wear protection, exceptional load-carrying ability, outstanding tackiness and ease of application at various temperatures. It also works well for applications in which gears experience high point-of-contact temperatures of 327ºC (620ºF) and above.
A product of advanced lubricant technology providing boundary lubrication, unmatched performance and versatility, Pyroshield Syn Open Gear Grease is formulated with high-viscosity 100 percent synthetic base oil, a non-melting thickening system and LE's proprietary heat stable additives. It contains a synergistic mix of Almasol®, LE's exclusive wear-reducing additive, and a unique combination of extreme pressure additives.
Pyroshield®, Almasol® and Duolec® are registered trademarks of Lubrication Engineers, Inc.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Extended-Life Oil Provides Smooth Hydraulic Power
A long-lasting, nonfoaming oil designed to protect the life of hydraulic systems, Equipower™ Ultra Hydraulic Oil (6132, 6146, 6168) offers superior protection against water contamination, rust, corrosion and oxidation. This formulation contains Monolec®, LE’s exclusive wear-reducing additive, and is available in three different viscosity grades. It outperforms other commercial hydraulic oils in thermal, oxidative and hydrolytic stability.
Premium quality paper machine oil made from select paraffinic base oil. Specifically formulated to provide excellent thermal oxidation stability and rust and corrosion protection for long oil life. Excellent detergency prevents carbon deposit build-up and coking to minimize oil system plugging and premature bearing failures. Excellent wear protection provided by additives and Monolec®, LE's exclusive wear-reducing additive.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
A high quality compressor oil designed specifically for use in centrifugal air compressors. Formulated with highly refined select paraffinic base stocks synergistically blended with additives that offer excellent corrosion protection, superior thermal stability, good water separation, antifoaming performance and oxidation resistance. Contains MONOLEC®, LE's exclusive wear-reducing additive.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Increases Equipment Life and Promotes Easier Operation
Among the most severe demands on lubricants are those related to operation of air-activated percussion tools such as rock drills and jack hammers. These demands include pounding, constant pressure and moist air. Unlike ordinary oils used for air-powered tool lubrication, which require frequent replenishment, Monolec® Rock Drill Lubricant possesses superior performance features and qualities designed specifically for more effective and prolonged service in these extreme service conditions.
High-quality, long-lasting lubricant for machine ways and other sliding surfaces, featuring excellent lubricity and good adhesive properties. Contains Monolec®, LE’s exclusive wear-reducing additive. USDA H2 rated and approved for use in applications requiring the Cincinnati Machine P50 specification
Versatile Oil Provides Long-Term Anti-Wear Protection
Monolec® R & O Compressor / Turbine Oil is a versatile, heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate wear. Available in seven different viscosity grades, it is ideally suited for use in all types of air compressors and oil circulating systems.
This long-lasting, nonfoaming, turbine-quality oil provides peace of mind by ensuring that your equipment works when it is needed, whether you run it intermittently or continuously. With its superior resistance to heat, oxidation and moisture, Monolec R & O Compressor / Turbine Oil significantly outperforms ordinary commercial air compressor and turbine oils. It contains Monolec, LE’s exclusive wear-reducing additive, as well as highly effective rust and oxidation inhibitors.
Provides reduced toxicity without reduced performance
LE’s Low Tox® Turbine Oil (6412-6414) provides long-lasting performance, equivalent to conventional turbine oils while providing lower toxicity than biodegradable turbine oils. Its advanced technology formulation – with highly refined mineral oil and specially selected additives – offers low toxicity, but it does not sacrifice lubrication performance or necessitate shortening of lubricant change intervals; there is no worry of premature oxidation or failure of the lubricant as there is with most vegetable oil-based products. Low Tox Turbine Oil meets or exceeds OEM requirements for many generators, turbines and governors; it is especially suited for use in hydroelectric facilities and flood control structures requiring lubricants.
Premium Oil Boosts Turbine Performance
Highly effective for steam, hydro and gas turbine applications, Monolec Turbine Oil (6461-6463) reduces varnish, reduces water contamination, lengthens equipment life and extends drain intervals. It is a premium, high performance turbine oil with excellent water separation characteristics, rust and oxidation inhibitors, and improved wear-reducing properties. Its proprietary formula consists of select low-volatility paraffinic base fluids enhanced with a synergistic mix of high-performance additives.
Certain turbine applications - including gear-driven turbines or those in which a hydraulic control system and turbine share the same oil - require oil with anti-wear properties. Unlike many anti-wear additives that decrease the oxidation resistance of turbine oils, the proprietary wear-reducing additive in Monolec Turbine Oil provides increased protection against wear with no negative effect on the oxidation life of the oil.
Monolec® is a registered trademark of Lubrication Engineers, Inc.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Advanced formula provides superior oxidation stability & deposit control for gas combustion turbines
Formulated specifically for use in gas combustion turbines, Endure™ Turbine Oil (6481-6482) features a unique blend of highly refined base oils and proprietary additive technology. Its advanced formula provides superior oxidative and thermal stability while preventing varnish and sludge formation on critical surfaces. Endure Turbine Oil ensures long-lasting, trouble-free performance in gas combustion turbines, minimizing unplanned outages and maximizing uptime.
Oil problems are estimated to be the cause of nearly one-fifth of all forced turbine outages, according to “A Comprehensive Guide to Industrial Turbine Lubricants,” by Afton Chemical Corp. Chief among the various mechanisms inside a turbine system that can result in degradation of the oil while in service are oxidation and thermal degradation.
Oxidation and thermal degradation can lead to base fluid breakdown, additive depletion, increased viscosity, varnish and sludge formation, increased acid number, increased foaming, loss of water separation properties, filter plugging, valve sticking, and rust and corrosion. Bottom line – the lubricant’s life span is shortened and equipment reliability is compromised. LE developed Endure Turbine Oil to address these problems.
Extended-Life Oil Provides Smooth Hydraulic Power
A long-lasting, nonfoaming oil designed to extend the life of hydraulic systems, Equipower™ Ultra HVI Hydraulic Oil (6522, 6532, 6546) offers superior protection against water contamination, rust, corrosion and oxidation. This high viscosity index formulation contains Monolec®, LE’s exclusive wear-reducing additive, and outperforms other commercial hydraulic oils in thermal, oxidative and hydrolytic stability. It is recommended for hydraulic applications with operating temperatures that fluctuate widely on a daily basis.
Provides reduced toxicity without reduced performance
LE’s Low Tox® Hydraulic Oil (6603) provides superior performance – equivalent to premium hydraulic oils – with long oil life and excellent wear protection, while providing lower toxicity than biodegradable hydraulic oils. Its advanced technology formulation – with highly refined mineral oil and specially selected ashless additives – offers low toxicity, but it does not sacrifice lubrication performance or necessitate shortening of lubricant change intervals; there is no worry of premature oxidation or failure of the lubricant as there is with most vegetable oil-based products.
NSF H1 registered for incidental food contact and developed specifically for use in the Manzel lubrication system of Angelus seamers. Contains ashless additive technology that provides superior dispersant capabilities to completely emulsify water with the oil. Provides excellent anti-wear properties, including R&O resistance. Resists foaming.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Oxidation-Resistant Oil Ensures Cool-Running, Long-Lasting Electrical Equipment
LE’s Transformer Oil (6760) is a highly oxidation-resistant oil for all types of electrical service. Designed for use as an insulating and cooling medium for electrical apparatus, it has excellent heat transfer properties for cooler operation and longer life.
Versatile Oil Provides Superior Long-Term Anti-Wear Protection in Variety of Applications
Multilec® Industrial Oil is a heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate wear. Available in seven different viscosity grades, this multipurpose lubricant is ideally suited for use in all types of air compressors, hydraulics, oil circulating systems, industrial turbines, and R & O industrial and gear applications.
This long-lasting, nonfoaming, turbine-quality oil provides superior resistance to heat, oxidation and moisture. It also provides peace of mind by ensuring that your equipment works when it is needed, whether you run it intermittently or continuously. Multilec Industrial Oil features a balanced blend of premium base oils and robust additive technology, including rust and oxidation inhibitors and Monolec, LE’s exclusive wear-reducing additive. This formulation delivers a powerful combination of performance and versatility that far exceeds that of other lubricants on the market – both synthetic and petroleum.
Long-Lasting Lubricant Provides Heavy-Duty Transmission Protection for Hard-Working Fleets
Even in severe field conditions, Monolec® Power Fluid (7500) ensures constant, long-lasting performance for most heavyduty transmissions, combination transmission-hydraulic (wet brake) systems, and hydraulic systems. Its unique blend provides the proven protection of the most advanced wear, friction and oxidation inhibitors, all in one complete formula that you can count on to deliver superior wear performance, consistent friction characteristics, exceptional oxidation stability and excellent foam prevention.
Monolec Power Fluid meets the requirements of a wide variety of manufacturers for systems used in construction, farming, manufacturing, material handling, mining, quarrying and trucking. Its versatility allows inventory consolidation, with just one lubricant for all of your transmission, axle and hydraulic protection needs.
Heavy-Duty Formula Improves Equipment Performance
Monolec® Drive Train Fluid (7511, 7531, 7551) is a high performance, heavy-duty drive train fluid that protects off-road equipment and keeps it in working order, whether it is running intermittently or continuously. It works with today’s newer transmission designs and can be used in final drives, wet brakes and various torque convertors. It improves power throughput density, helping reduce mechanical shudder and eliminate brake chatter and clutch wear. Ideal for use in construction, mining, quarries, hydraulic fracturing and other applications where downtime can be costly, this versatile fluid meets or exceeds the performance requirements of Caterpillar, Allison and Komatsu.
This is not an engine oil formulated to be a drive train fluid; Monolec Drive Train Fluid was specifically developed to meet the rigorous demands of the application. Its carefully selected additive system – which includes Monolec®, LE’s exclusive wear-reducing additive – balances the need for lubricity along with the frictional properties needed to optimize the operation of powershift clutches and wet brakes. The fluid’s high-viscosity base oil helps it stay cool during operation – even in extreme temperatures – with no need for seasonal changeouts.
A heavy-duty engine oil made from select synthetic base stock. Provides exceptional protection against rust and corrosion. Superior oxidation resistance and anti-foam properties. Contains a powerful detergent/dispersant package. Provides excellent anti-wear protection and deposit control. Contains MONOLEC®, LE's exclusive wear reducing additive.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Heavy Duty Formula Promotes Optimal Engine Performance
Monolec Two-Cycle Engine Oil (8104) is a heavy duty oil specifically formulated to provide outstanding lubrication for all two-cycle engines, allowing them to run smoother, cooler and more efficiently. Recommended applications include chainsaws, lawn mowers, portable generators, outboard motors, and similar two-cycle applications. It contains premium base oil for greater film strength, better lubricity and higher natural viscosity index than competitive products, and contains LE’s exclusive Monolec® additive for superior wear protection. This special formulation mixes easily with all types of gasoline and ensures optimal engine performance.
In two-cycle engines, lubrication is achieved by mixing the lubricant with the fuel, and using the fuel coming into the carburetor as a carrier for the oil. Lubrication of the entire engine must be accomplished in a single pass through the system. The fuel/oil/air mixture passes from the carburetor into the combustion chamber in a split second, where high temperatures instantly vaporize the gasoline. The oil, in droplet form, must lubricate all moving parts of the crankshaft, plus the piston and cylinder. If combustion of the oil is incomplete, or byproducts are deposited in the cylinder, serious problems can develop.
Extended-Drain CK-4 Oil Offers Ultimate Package of Performance & Protection for Diesel Engines
Monolec Ultra® Engine Oil provides exceptional performance and extended-drain service for on- and off-road diesel engines, including stationary engines. It has been formulated to exceed API’s CK-4 technology standards focusing on engine wear protection, oxidation stability, shear stability, resistance to aeration, and compatibility with low emission engines. With its superior formulation of select base oils and Monolec®, LE’s exclusive wear-reducing additive, Monolec Ultra offers dependable all-weather performance, reduces unscheduled downtime, and helps fleets achieve costs savings.
Superior Single Grade Oil Extends Drains in Diesel Engines
Monolec® GFS Engine Oils are a family of SAE 30 through 50 straight-grade engine oils formulated for extended drain service, primarily in off-road diesel engines. They contain Monolec, LE’s exclusive wear-reducing additive, and are specified mostly for engines but are also sometimes used in industrial applications, such as air compressors.
Full Synthetic Oil with Premium Additive Package Provides Unparalleled Benefits for Gasoline Engines
To provide the best protection for your car’s engine without sacrificing performance, endurance and efficiency, look no further than LE’s new Monolec® Tetra-Syn™ Engine Oil. LE has harnessed the latest technology and knowledge to formulate this high-quality, high-performance, proprietary synthetic engine oil for gasoline engines.
Available in SAE 5W-20 and 5W-30 grades, LE’s Monolec Tetra-Syn Engine Oil exceeds the minimum standards set by American Petroleum Institute (API), providing the ultimate combination of performance, protection, endurance and efficiency. It is a best in class 100 percent synthetic gasoline engine oil, and the secret to its superiority is the proprietary additive package designed to deliver resource-conserving fuel economy, protect emissions systems, keep engines clean, keep deposits to a minimum, and mitigates wear in Low-Speed Pre-Ignition (LSPI) conditions.
Whether you are a car enthusiast or the manager of a fleet of gasoline engines, you’ll appreciate Monolec Tetra-Syn Engine Oil’s ability to keep your engines running for longer periods while safely extending the time between oil changes.
Full Synthetic Oil with Premium Additive Package Provides Unparalleled Benefits for Gasoline Engines
To provide the best protection for your car’s engine without sacrificing performance, endurance and efficiency, look no further than LE’s new Monolec® Tetra-Syn™ Engine Oil. LE has harnessed the latest technology and knowledge to formulate this high-quality, high-performance, proprietary synthetic engine oil for gasoline engines.
Available in SAE 5W-20 and 5W-30 grades, LE’s Monolec Tetra-Syn Engine Oil exceeds the minimum standards set by American Petroleum Institute (API), providing the ultimate combination of performance, protection, endurance and efficiency. It is a best in class 100 percent synthetic gasoline engine oil, and the secret to its superiority is the proprietary additive package designed to deliver resource-conserving fuel economy, protect emissions systems, keep engines clean, keep deposits to a minimum, and mitigates wear in Low-Speed Pre-Ignition (LSPI) conditions.
Whether you are a car enthusiast or the manager of a fleet of gasoline engines, you’ll appreciate Monolec Tetra-Syn Engine Oil’s ability to keep your engines running for longer periods while safely extending the time between oil changes.
Offers Dependable, Heavy-Duty Performance in Diesel Engines
Monolec® Engine Oil provides excellent service for engines in mobile equipment and stationary generators. With its formulation of select base oils, shear-stable viscosity improver and Monolec®, LE’s exclusive wear-reducing additive, Monolec Engine Oil offers increased fuel efficiency, dependable performance and wear protection.
Offers Dependable, Heavy-Duty Performance in Diesel Engines
Monolec® Engine Oil provides excellent service for engines in mobile equipment and stationary generators. With its formulation of select base oils, shear-stable viscosity improver and Monolec®, LE’s exclusive wear-reducing additive, Monolec Engine Oil offers increased fuel efficiency, dependable performance and wear protection.
Offers Dependable, Heavy-Duty Performance in Diesel Engines
Monolec® Engine Oil provides excellent service for engines in mobile equipment and stationary generators. With its formulation of select base oils, shear-stable viscosity improver and Monolec®, LE’s exclusive wearreducing additive, Monolec Engine Oil offers increased fuel efficiency, dependable performance and wear protection. It is designed specifically for applications requiring the CJ-4 specification for those companies and individuals not wanting to switch to a CK-4 fluid.
Offers Dependable, Heavy-Duty Performance in Diesel Engines
Monolec® Engine Oil provides excellent service for engines in mobile equipment and stationary generators. With its formulation of select base oils, shear-stable viscosity improver and Monolec®, LE’s exclusive wear-reducing additive, Monolec Engine Oil offers increased fuel efficiency, dependable performance and wear protection.
Extended-Drain CK-4 Oil Offers Ultimate Package of Performance & Protection for Diesel Engines
Monolec Ultra® Engine Oil provides exceptional performance and extended-drain service for on- and offroad diesel engines, including stationary engines. It has been formulated to exceed API’s CK-4 technology standards focusing on engine wear protection, oxidation stability, shear stability, resistance to aeration, and compatibility with low emission engines. With its superior formulation of select base oils and Monolec®, LE’s exclusive wear-reducing additive, Monolec Ultra offers dependable all-weather performance, reduces unscheduled downtime, and helps fleets achieve costs savings.
Multigrade Viscosity, Low-Ash Oil Provides Long-Lasting, All-Weather Protection for Natural Gas Engines
Formulated for use in stationary and mobile natural gas engines, Monolec® Natural Gas Engine Oil (8845) is made from a synergistic blend of high-performance base fluids, salicylate detergent chemistry and superior wear-reducing additives. The resulting low-ash, engine-cleaning blend provides the perfect long-lasting wear protection without the accumulation of heavy deposits.
Monolec 8845 is a proven multigrade performer in various engine makes and models, even under severe operating conditions. It can be used with sparkplug-ignited engines, including mobile applications such as buses with converted Cummins and Detroit diesel engines.
Broad-Range Synthetic Diesel Engine Oil Pays for Itself with All-Weather Performance, Wear Protection and Fuel Economy
Monolec Ultra® Syn Heavy Duty Engine Oil is a multiviscosity SAE 5W-40 synthetic oil for diesel engines that delivers outstanding year-round performance, fuel efficiency and extended drains. It has been formulated to exceed API’s CK-4 technology standards focusing on engine wear protection, oxidation stability, shear stability, resistance to aeration, and compatibility with low-emission engines. With its synthetic base oil and exclusive additive package, it provides reliable lubrication – even in low temperatures – without the shear stability and viscosity problems of conventional diesel engine oils. Its high viscosity index indicates less change in viscosity over a broad temperature range.
A primary advantage of 5W-40 vs. 15W-40 engine oil is better fuel economy. In a controlled lab setting, GM 6.5L dyno testing showed a 1.5-1.6% fuel economy improvement. In addition, lowviscosity oils achieve flow quickly during cold startups. Most engine wear occurs within the first two to five minutes of starting. However, conventional low-viscosity oils have not always provided adequate oil film at operating temperatures, which resulted in increased wear and made it difficult to obtain OEM approvals. Monolec Ultra Syn eliminates this problem with its ability to flow quickly in cold weather and maintain viscosity at operating temperatures. It also meets all major OEM approvals.
Monolec Ultra® Syn Heavy Duty Engine Oil lubricates parts faster, prevents wear during operation, and decreases fuel consumption – making it the smart choice for fleet managers and owner operators who want better fuel economy and reliable low temperature performance.
For Heavy-Duty, Long-Drain Service in Railroad Diesel Engines
Made from highly refined select base oils, LE's Ultra RDE Oil was designed to protect silver alloy bearings in modern high-efficiency diesel engines from wear and contamination. In addition to increasing the engine lifespan, Ultra RDE improves fuel efficiency and significantly reduces oil consumption.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Superior straight-grade, low ash natural gas engine oil
8945 MONOLEC® Gas Engine Oil is a superior, straight-grade, low ash natural gas engine oil formulated with cutting edge technology that differentiates its performance from other natural gas engine lubricants. Formulated using high-performance base fluids, salicylate additive chemistry for superior deposit control, and outstanding wear reducing additives, including MONOLEC®, LE's exclusive wear- reducing compound. All of these components work together synergistically to greatly decrease friction, minimize wear, remove heat, and keep engine components clean. It has been proven in various engine types, under severe operating conditions.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Heavy-Metal-Free Synthetic Oil Provides Extreme Protection
Pyroshield Syn Hvy & XHvy Open Gear Lubricants are heavy-duty synthetic fluids designed to provide outstanding protection for high-load, heavy-shock applications, such as large shrouded open gears used in the mining, mineral processing and cement industries. Pyroshield Syn Open Gear Lubricants are non-asphaltic and environmentally friendly, containing no heavy metals. Each lubricant features a synergistic mix of Almasol®, LE's exclusive wear-reducing additive, and a unique combination of extreme pressure additives.
LE Offers Pyroshield's Advanced Technology as Solution for Large Shrouded Open Gears
Lubrication Engineers developed Pyroshield Syn Hvy and XHvy Open Gear Lubricants to meet the specific requirements for the lubrication of large shrouded open gears, and to address the main problems associated with traditional lubricants for these gears.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Versatile Synthetic Provides Cool, Clean Performance
Monolec Syn Industrial Oil (9032-9150, 9220-9460) is designed to prolong equipment life by combating the effects of high temperatures, contamination and loads that accelerate wear. It is a versatile synthetic lubricant that meets or exceeds the requirements of gearboxes, air compressors, vacuum pumps, hydraulic systems, and roll mill bearings found in the textile, plastic, rubber and paper industries. It is formulated with high-viscosity 100 percent synthetic base oil and a specially developed additive package for applications running at extreme temperatures. The additive package provides outstanding thermal stability and rust and oxidation resistance as well as wear resistance as pressures and temperatures rise. A foam suppressant completes the package. The base oil and additive formulation works synergistically to reduce wear, extend oil drain intervals, reduce oil consumption, and practically eliminate deposits and sludge formation, all while providing excellent compatibility with seals.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
_ICE_9273_reduced.png "Box (12 Cans Closed)")
WITHSTANDS HIGH TEMPERATURES, WON'T SLING OFF, IN A CONVENIENT AEROSOL CAN
LE's 9102 SYNTEMP® Synthetic Lubricant is a unique, heavy duty, high temperature spray lubricant designed for open gears, chains, cables, sealed bearings and slides - or any "tight" area where grease lubrication can be best accomplished by the spray method. Its superior lubricating qualities reduce wear, friction and heat far more effectively than ordinary greases.
This high temperature grease is water resistant, non-melting, rust and oxidation resistant, mechanically stable, has EP characteristics and contains MONOLEC®, LE's exclusive wear-reducing additive.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Spray Lubricant Ensures Long-Lasting Lubrication in Tough Conditions & Broad Temperature Range
Almasol® Dry Film Lubricant (9200) is a solid film spray lubricant designed for use where permanent lubrication with exceptional long wear life and low frictional properties is desired, and oil and grease cannot be used. For use in a wide temperature range, it combines superior dry film lubrication with safe and easy spray application.
Almasol Dry Film Lubricant provides dependable, long-lasting lubrication in extreme environments where conventional lubricants would be inadequate. It contains a carefully selected blend of Almasol and other solid lubricants of controlled particle size, dispersed in a fast-drying solvent system and resin binder. The resulting film has excellent adhesion.
PAG Gear Oil Provides Ultimate Wear Protection, Corrosion Resistance and Thermal Stability
LE’s Duolec® PAG Gear Lubricant (9705-9707) is a PAG gear oil that has been specially formulated for the ultimate in corrosion resistance, wear protection and thermal stability. Polyalkylene glycol (PAG) lubricants are synthetic formulations known for their high viscosity index, extreme pressure (EP) properties, and ability to handle temperature extremes. In addition to the PAG base fluid, this formulation features Duolec®, LE’s proprietary dual-acting additive that provides both wear-reducing and EP protection.
Duolec PAG Gear Lubricant is an excellent choice for lubricating a variety of bearings and gears – particularly worm gears – as well as other equipment operating under extreme conditions.
High-Performance Synthetic Oil Provides Reliable, Long-Lasting Protection for Heavily Loaded Gearboxes
Duolec® Syn Gear Lubricant is formulated with 100 percent synthetic base fluid to ensure excellent high- and low-temperature performance. The synthetic base fluid also provides oxidation stability, which contributes to long lubricant life and a reduction in costly lubricant changeovers.
Duolec Syn Gear Lubricant provides uninterrupted operation and long service life for expensive gear applications, including heavily loaded gearboxes that are exposed to temperature extremes. With its special blend of clean gear technology additives, Duolec Syn Gear Lubricant works to prevent deposit formations in high-temperature applications and will not break down over time. The lubricant also provides exceptional low temperature flow properties, protecting gears during the coldest startups.
Featuring Duolec®, LE’s proprietary additive that reduces friction and increases oil film strength, Duolec Syn Gear Lubricant is able to withstand incredible loads and stresses from heavy-duty applications such as pulverizer gear units.
Heavy-duty synthetic lubricant specifically designed for high temperature applications.
LE's ALMASOL® Syntemp Lubricant is a high temperature extreme pressure (EP) lubricant made from a very heavy synthetic fluid and non-melting base. It is specially formulated to provide exceptional protection at temperatures at which petroleum oils would completely oxidize (or carbonize).
ALMASOL® Syntemp Lubricant is excellent for use on large open gears exposed to very high temperatures. It is also recommended for use on kiln girth gears, large industrial gearing, oven chains, sliding surfaces, large slow moving (friction) bearings and similar applications.
Contains ALMASOL®, LE's exclusive wear-reducing additive, which protects against metal-to-metal contact and also serves to reduce friction and heat. ALMASOL® Syntemp Lubricant has exceptional water resistance and thus, remains unaffected by boiling water and steam. It also contains special rust inhibitors that prevent rust and corrosion.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Robust Formula Provides Long-Lasting Protection in Severe Service, including High & Low Temperatures
Monolec® Syn Gear Oil (9919 & 9923) is a 100 percent synthetic, limited slip gear oil with a high-performance additive package, making it an ideal choice for transmissions and differentials that encounter severe service conditions, including fleets of delivery trucks, heavy-duty pickup trucks, school buses, and bucket trucks. Its high-performance formula will not break down in severe service. It resists gear and bearing wear, viscosity loss, foaming, high-temperature oxidation, and volatility, allowing it to deliver long-lasting protection for any application where extreme pressure and shock loading is expected, including industrial gearboxes that require
enhanced EP protection.
In addition, Monolec Syn Gear Oil’s high-performance formula features a high viscosity index and low pour point that work together to provide high-temperature
film thickness and low-temperature fluidity, allowing it to be used in a wide range of environments – from very hot to below freezing.
A pure synthetic oil for high temperature applications.
Chains and conveyors which operate in high temperature environments are extremely difficult to lubricate effectively. Even the very finest petroleum oils oxidize very rapidly as temperatures climb, leaving behind deposits which are detrimental to smooth, efficient chain and conveyor operation.
To meet this severe test of lubricant technology, LE developed 9963 SYNOLEC® Lubricant. As the name implies, this special product is pure synthetic. It leaves no deposits to cause chains to bind, jump the sprocket or break, or conveyor rollers to slide or bind.
Since 9963 SYNOLEC is an oil, it can be applied easily with standard equipment . . . spray, drip applicator, or brush.
Experience has proved that 9963 SYNOLEC actually cleans off old deposits left by ordinary petroleum lubricants, and its continued use keeps chains, conveyors and bearings operating smoothly.
One of the major factors causing rough chain and conveyor operation is rust and corrosion. 9963 SYNOLEC is rust and oxidation inhibited, another strong feature for this superior lubricant.
But a lubricant must do more than just resist high temperatures and keep metal surfaces clean. It must protect against premature wear. 9963 SYNOLEC possesses excellent lubricating qualities to reduce friction and wear. And it also contains MONOLEC®, LE's exclusive wear-reducing additive.
MONOLEC creates a single (mono-molecular) lubricating layer on the metal surface, vastly increasing film strength without affecting tolerances. Forming microscopic “ball bearings,” MONOLEC allows opposing surfaces to slide by one another, greatly reducing friction, heat and wear.
While 9963 SYNOLEC was originally developed as a high-temperature chain and conveyor lubricant, it is also appropriate for sealed-for-life bearings and other high-temperature applications where an oil may be used.
Lubrication Engineers operates under an ISO 9001 Certified Quality System.
Synthetic H2 Lubricant Penetrates Hot Oven Chains, Remains Thermally Stable & Reduces Energy Use
Monolec® High Temperature Oven Chain Lubricant (9965) is a specially formulated lubricant recommended for use on high-temperature oven chains, providing wear protection and lowering power consumption. It is a USDA H2 lubricant made of a synergistic blend of synthetic base fluids and high-performance additives, including Monolec, LE’s exclusive wear-reducing additive. The synthetic base fluids provide excellent thermal stability and low volatility characteristics at high temperatures, while the additives help the lubricant prevent friction, wear and corrosion.
